The fully automatic through type cleaning machine can remove impurities such as oil stains. We can first understand the cleaning process flow.

清洗工艺：

Cleaning process:

上料→溶剂清洗→超声波清洗→喷淋市水漂洗→喷淋市水漂洗→隧道炉烘干→下料。

Loading → solvent cleaning → ultrasonic cleaning → spray water rinsing → spray water rinsing → tunnel furnace drying → unloading.

该清洗机主要由进料段、清洗腔室、超声波清洗腔室、市水喷淋漂洗、市水漂洗腔室、4个储液槽、循环过滤系统、自动恒温加热系统、隧道炉干燥系统、出料段、不锈钢网带输送系统、机架、电控柜等组成。

The cleaning machine is mainly composed of a feeding section, a cleaning chamber, an ultrasonic cleaning chamber, a municipal water spray rinsing chamber, a municipal water rinsing chamber, 4 liquid storage tanks, a circulating filtration system, an automatic constant temperature heating system, a tunnel furnace drying system, a discharge section, a stainless steel mesh belt conveying system, a rack, an electric control cabinet, etc.

本设备是一台精密清洗设备，它是使用水基清洗剂或水，辅以添加剂、活性剂，对需要清洗的工件进行精密清洗。据清洗工艺要求，可以清水中添加有关添加剂等，使水活化（皂化），减小水的表面张力和提高其活化能力，从而对附在工件表面的灰尘、废屑等进行湿润渗透到工件表面，再加以机械冲洗力，喷淋使污物脱离工件表面而被冲洗掉，再用清水漂洗，以洗去附在工件表面的清洗液，获得洁净的工件，达到清洗工件的目的。

This equipment is a precision cleaning equipment that uses water-based cleaning agents or water, supplemented by additives and activators, to perform precision cleaning on workpieces that need to be cleaned. According to the requirements of the cleaning process, relevant additives can be added to clean water to activate (saponify) the water, reduce the surface tension of the water, and improve its activation ability, so as to wet and penetrate the dust, waste debris, etc. attached to the surface of the workpiece to the surface of the workpiece. Then, mechanical washing force is applied to spray the dirt off the surface of the workpiece and be washed away. Then, rinse with clean water to remove the cleaning solution attached to the surface of the workpiece and obtain a clean workpiece, To achieve the purpose of cleaning the workpiece.

该机为全自动清洗设备，清洗过程由PLC控制。操作者将有工件的清洗框或工件放置在输送带上送往各工序段，对工件进行超声波脱脂、喷淋漂洗、漂洗、隧道炉烘干燥，操作者在出口处将清洗好的工件卸下。整个清洗主机密封，效果良好，装有观察玻璃窗。

This machine is a fully automatic cleaning equipment, and the cleaning process is controlled by PLC. The operator places the cleaning frame or workpiece with the workpiece on the conveyor belt and sends it to each process section. The workpiece is subjected to ultrasonic degreasing, spray rinsing, rinsing, and tunnel furnace drying. The operator unloads the cleaned workpiece at the outlet. The entire cleaning host is sealed and has a good effect, equipped with observation glass windows.