随着全自动超声波清洗机的应用越来越广，很多企业现在已经离不开超声波清洗设备了，但是全自动超声波清洗机是怎样制作而成的呢，全自动超声波清洗机的制作过程是怎样的呢，下面我们就全自动超声波清洗机的制作过程进行简单介绍。

With the increasing application of fully automatic ultrasonic cleaning machines, many enterprises can no longer do without ultrasonic cleaning equipment. However, how is a fully automatic ultrasonic cleaning machine made? What is the production process of a fully automatic ultrasonic cleaning machine? Below, we will briefly introduce the production process of a fully automatic ultrasonic cleaning machine.

全自动超声波清洗机槽体的制作：

Production of fully automatic ultrasonic cleaning machine tank:

先需要购买304或者316的不锈钢钢板，因为全自动超声波清洗机外围都是不锈钢制作而成。订购回来之后，就进行加工，根据需要制作超声波清洗槽的尺寸，用剪板机进行剪切到需要尺寸，然后对剪切好的板材进行加工，先需要折弯，根据槽体尺寸折弯到一定程度，开始制作槽体，需要把折弯好的不锈钢件进行焊接，制作成全自动超声波清洗机槽体。需要不锈钢方通做支架，然后把槽体固定在上面。

First, you need to purchase 304 or 316 stainless steel plates, as the periphery of the fully automatic ultrasonic cleaning machine is made of stainless steel. After the order is placed, it is processed and the size of the ultrasonic cleaning tank is made according to the needs. The plate is cut to the required size using a shearing machine, and then the cut plate is processed. First, it needs to be bent and bent to a certain extent according to the tank size to start making the tank. The bent stainless steel parts need to be welded to create a fully automatic ultrasonic cleaning machine tank. We need a stainless steel square tube as a support, and then fix the tank body on it.

当槽体成形后，开始在设计超声波换能器（俗称：振子、震头）位置，根据槽体大小，分为单边震式、双边震式或底震式，根据需要而定，在需要装震头的那面板上，开始焊接连接震头的螺丝，完成后，开始粘贴震头胶，在连接震头螺丝的周围，之后就开始装震头，每个螺丝位装一个震头。

After the tank body is formed, start to weld the screws connecting the vibration head on the panel where the vibration head needs to be installed. After that, start to paste the vibration head glue around the screws connecting the vibration head, and then start to install the vibration head.

震头装好后，开始接连接震头的线，完成后。装加热装置，根据需要选择合适的加热板。以上完成后，开始接加热的线和超声波机器的线，并且开始配外面的门板，还有温控开关，和全自动超声波清洗机的脚轮脚杯等。

After the shock head is installed, start connecting the wires to the shock head, and after completion. Install a heating device and select a suitable heating plate as needed. After the above is completed, start connecting the heating wire and the wire of the ultrasonic machine, and start matching the external door panel, temperature control switch, and the caster foot cup of the fully automatic ultrasonic cleaning machine.

经过一系列的过程，一台全自动超声波清洗机基本成型了。其实这样还不算，还需要调试，全自动超声波清洗机每台都要经过48小时以上的调试时间，保证设备无故障出厂。您有设备需求可以来我们网站http://senfuai.com留言咨询！

After a series of processes, a fully automatic ultrasonic cleaning machine has been basically formed. In fact, this is not enough, it still needs to be debugged. Each fully automatic ultrasonic cleaning machine needs to go through more than 48 hours of debugging time to ensure that the equipment leaves the factory without any faults. You can come to our website if you have equipment requirements http://senfuai.com Leave a message for consultation!