使用多槽手动超声波清洗机能够对各种工件进行快速高能效的清洗，很多人工没有办法清洗干净的缝隙、孔洞，都能在多槽手动超声波清洗机中得到有效清洁，所以现在这种超声波清洗设备广受应用。那么怎样才能让多槽手动超声波清洗机清洗的更加干净呢？

The use of multi-slot manual ultrasonic cleaning machine can clean various workpieces quickly and efficiently. Many gaps and holes that cannot be cleaned manually can be effectively cleaned in the multi-slot manual ultrasonic cleaning machine. Therefore, this ultrasonic cleaning equipment is widely used now. So how can we make the multi-slot manual ultrasonic cleaner cleaner cleaner?

1、使用品质好的纯水

1. Use high-quality pure water

如果想让多槽手动超声波清洗机达到更好的清洗效果，那么就要注意外接的纯净水能否达到要求的纯度，因为超声波清洗机在作业时，对电导率和电阻都有一定的要求，而水质的纯度不同，其电导率和电阻也都会不一样，所以为了提高清洗的洁净度要注意清洗机中使用的纯水品质良好。

If you want to achieve better cleaning effect for the multi-slot manual ultrasonic cleaner, you should pay attention to whether the external purified water can reach the required purity, because the ultrasonic cleaner has certain requirements for conductivity and resistance when it is operating, and the conductivity and resistance will vary with the purity of water, so in order to improve the cleanliness of cleaning, you should pay attention to the good quality of pure water used in the cleaner.

2、频率的选择要合适

2. The selection of frequency should be appropriate

多槽手动超声波清洗机清洗工件就是通过超声波发出的频率让清洗液产生空化效应，从而加速溶解和剥离被清洗工件上灰尘、油脂等污垢，所以选择合适的超声波频率也能提高清洗的效果。例如，使用水或水清洗剂时由空化作用引起的物理清洗力需要使用低频超声波；对小间隙、狭缝、深孔的零件清洗高频超声波效果更好。

The multi-slot manual ultrasonic cleaning machine cleans the workpiece by using the frequency of ultrasonic wave to make the cleaning fluid produce cavitation effect, thus accelerating the dissolution and stripping of dust, grease and other dirt on the cleaned workpiece. Therefore, selecting the appropriate ultrasonic frequency can also improve the cleaning effect. For example, when using water or water cleaning agent, the physical cleaning force caused by cavitation needs to use low-frequency ultrasound; High-frequency ultrasonic cleaning is better for parts with small gaps, narrow slots and deep holes.

3、清洗液剂量要适中

3. The dosage of cleaning fluid should be moderate

一般清洗液液面高于振动子表面0.5米以上为佳，由于多槽手动超声波清洗机受驻波场的影响，波节处振幅很小，波幅处振幅大，所以为了避免造成清洗不均匀，应该注意使用合适的清洗液剂量，并将清洗物品位置应放在波幅处，这样清洗效果就会更好。

Generally, the liquid level of cleaning solution is better than 0.5m above the surface of the vibrator. Due to the influence of the standing wave field, the amplitude at the wave node is very small, and the amplitude at the wave amplitude is large. Therefore, in order to avoid uneven cleaning, attention should be paid to the use of appropriate cleaning solution dose, and the cleaning items should be placed at the wave amplitude, so that the cleaning effect will be better.

此外用多槽手动超声波清洗机清洗工件要注意槽液不能加的太满，以免发生两槽超声波清洗剂之间相互混合以及沥干时清洗筐底部粘液的现象。此外，多槽手动超声波清洗机的每个槽应为独立的操作工序，注意不要将两槽清洗剂相互串用或人为减少操作工序以及清洗的操作时间。

In addition, when cleaning the workpiece with a multi-slot manual ultrasonic cleaner, pay attention that the tank liquid should not be too full, so as to avoid the phenomenon of mutual mixing between the two tanks of ultrasonic cleaner and the mucus at the bottom of the cleaning basket when draining. In addition, each tank of the multi-slot manual ultrasonic cleaning machine should be an independent operation process. Pay attention not to use the cleaning agents of the two tanks in series or reduce the operation process and cleaning time manually.

通常在清洗时每道工序的时间定为三至五分钟，如果被清洗物品的表面积比较大，或者工件的结构较为复杂时，要注意根据实际情况酌情调整多槽手动超声波清洗机的清洗时间。若被清洗物容易出现重叠以及粘附的现象，那么在将被清洗物放入及取出槽液的时候可以抖动一下工件，让清洗剂充分与工件接触以提高清洗效果。

Generally, the time of each process is set at three to five minutes during cleaning. If the surface area of the cleaned object is large or the structure of the workpiece is complex, the cleaning time of the multi-slot manual ultrasonic cleaning machine should be adjusted according to the actual situation. If the object to be cleaned is prone to overlap and adhesion, the workpiece can be shaken when the object to be cleaned is put into and taken out of the tank liquid, so that the cleaning agent can fully contact the workpiece to improve the cleaning effect.

使用以上几种方法就能够有效提高多槽手动超声波清洗机的清洗洁净度，大家在使用多槽手动超声波清洗机的时候就要多注意。此外，每一种型号的超声波清洗机都有着一定的差别，所以，在实际的应用过程中大家应该注意按照超声波清洗机的操作说明书来清洗。关注我们http://senfuai.com，了解更多相关事项！

Using the above methods can effectively improve the cleaning cleanliness of the multi-slot manual ultrasonic cleaner. You should pay more attention when using the multi-slot manual ultrasonic cleaner. In addition, each type of ultrasonic cleaner has certain differences, so in the actual application process, everyone should pay attention to cleaning according to the operating instructions of the ultrasonic cleaner. Follow us http://senfuai.com , learn more about relevant matters!