通过式喷淋清洗机适用于各种行业的压铸件清洗，并配有电加热系统，可设置恒温装置，具有多工位，功能全，结构合理，操作方便，清洗效果好的优点，对于流水线零件的清洗，改善劳动环境，提高清洗质量有重要意义。其使用范围较广，适用于各种五金零件，压铸件，液压件，齿轮，轴承，汽车零部件等各种制造业。

The pass-through spray cleaning machine is applicable to the cleaning of die-casting parts in various industries. It is equipped with an electric heating system and can be equipped with a constant temperature device. It has the advantages of multiple stations, full functions, reasonable structure, convenient operation and good cleaning effect. It is of great significance for the cleaning of parts in the assembly line, improving the working environment and improving the cleaning quality. It has a wide range of applications and is applicable to various manufacturing industries such as various hardware parts, die-casting parts, hydraulic parts, gears, bearings, auto parts, etc.

通过式喷淋清洗机工作前先检查清洗液的配方浓度和配方比例是否合适，水箱液面高度是否够；分别调定清洗液箱和漂洗液箱的电接点温度计为50-60度；用钥匙将电源控制开关，置于开位置；开启加热器，使其开始自动加温；开启浮油排除装置开始浮油排除，因此式水泵未开启，水面平静，排油效果好。

Before working, check whether the formula concentration and proportion of the cleaning solution are appropriate and whether the liquid level of the water tank is high enough; Set the electric contact thermometer of cleaning solution tank and rinsing solution tank to 50-60 degrees respectively; Turn the power control switch to the ON position with the key; Turn on the heater to start automatic heating; Start the oil slick removal device to remove the oil slick, so the water pump is not started, the water surface is calm, and the oil drainage effect is good.

等温度升到预定值后即开始工作，操作者根据需要选择开关，按每个单动按钮，使水泵，吸雾，输送等全部动作。当机器运行后，操作工人便可以在装料口不断地把零件装载输送网带，清洗，漂洗，吹干，输出，在卸料口取下清洗好的零件

After the temperature rises to the preset value, the operation starts. The operator selects the switch according to the need, and presses each single-action button to make the water pump, mist suction, transportation and other actions. After the machine is running, the operator can continuously load the parts into the conveyor belt at the loading port, wash, rinse, blow dry, output, and take down the cleaned parts at the unloading port

通过式喷淋清洗机清洗工作结束后，当零件取下，按停止按钮，全机停止。清洗液应定期添加自来水和一定比例的金属清洗液以补充消耗，使液面保持在一定高度，如果清洗效果达不到工艺要求时，应全部更换清洗液。清理设备污垢后，关闭电源。

After the cleaning of the through-type spray cleaner is completed, when the parts are removed, press the stop button to stop the whole machine. The cleaning fluid shall be regularly added with tap water and a certain proportion of metal cleaning fluid to supplement the consumption, so as to maintain the liquid level at a certain height. If the cleaning effect cannot meet the process requirements, the cleaning fluid shall be completely replaced. Turn off the power after cleaning the dirt on the equipment.

通过式喷淋清洗机设备在操作使用过程中为了能够保证设备的良好性能，都是存在一定条件以及要求的。希望大家能够通过上述所介绍的这些设备知识能够对大家操作使用设备有所帮助，详细了解关于清洗机设备的使用要求还是非常有必要的。更多相关内容就来我们网站http://senfuai.com咨询吧！

In order to ensure the good performance of the equipment during the operation and use, there are certain conditions and requirements. I hope you can help you operate and use the equipment through the equipment knowledge described above. It is necessary to understand the requirements for the use of the cleaning machine in detail. Come to our website for more relevant content http://senfuai.com Ask!