喷淋清洗机在进行使用时主要是利用传动链条带动工件输送，在一定程度上主要应用在喷淋工艺清除工件上的附属物然后对其进行烘干；待清洗的工件放于输送链网上，经链网送入清洗机腔体，依照程序清洗烘干后，送至卸料台出料。那你知道喷淋清洗机清洗要根据什么要求来吗？

The spray cleaning machine is mainly used to drive the workpiece transportation with the transmission chain when it is used. To a certain extent, it is mainly used in the spray process to remove the accessories on the workpiece and then dry it; The workpieces to be cleaned are placed on the conveying chain net and sent to the chamber of the cleaning machine through the chain net. After cleaning and drying according to the procedure, they are sent to the unloading table for discharging. Do you know what the requirements of spray washer cleaning are?

（1）根据要喷淋清洗工件的污垢具体特点

(1) According to the specific characteristics of the dirt on the workpiece to be sprayed and cleaned

在设计一个清洗工艺时，先要对污垢的性质、数量以及在清洗表面附着的情况进行了解。通常的清洗工艺和设备都是针对特定的污垢而设计的，一般是先用经济的方法将大部分污垢除去，然后用其他的方法对残留的污垢进行处理，用分步进行的方法组成一个清洗工艺。

When designing a cleaning process, it is necessary to understand the nature, quantity and adhesion of dirt on the cleaning surface. The common cleaning process and equipment are designed for specific dirt. Generally, most dirt is removed by economic methods, and then residual dirt is treated by other methods. A cleaning process is composed of steps.

（2）对喷淋清洗洗净程度的要求

(2) Requirements for cleaning degree of spray cleaning

在选择清洗工艺及设备时，须考虑清洗要求达到的喷淋洗净程度。对不同洗净程度要求的清洗应选择不同的清洗工艺和设备。洗净程度要求越高，清洗成本也越高，而且生产成本是以几何级数递增的，但是在某些情况下，为了避免出现因清洗效果不佳而造成损失，选择成本高的清洗工艺和设备也是有必要的，自然就不会把生产的经济性放在先要考虑的地方了。

When selecting the cleaning process and equipment, the spray cleaning degree required for cleaning must be considered. Different cleaning processes and equipment shall be selected for cleaning with different cleaning degree requirements. The higher the cleaning degree is required, the higher the cleaning cost is. Moreover, the production cost increases in geometric progression. However, in some cases, in order to avoid losses caused by poor cleaning effect, it is necessary to choose high cost cleaning processes and equipment. Naturally, the economy of production will not be considered first.

总之喷淋清洗机水位清洗节拍快，效果统一，不会对工件造成磨损，设备中每个环节的工作时间、温度和功率可以按需设置；设备上料采用双确认按钮，并配有安全光栅，确保操作人员安全，独立控制柜，上下料工位处配有悬臂控制面板。等等。您有什么需求可以随时来我们网站senfuai.com咨询！

In short, the water level cleaning of the spray washer is fast and uniform, and will not cause wear to the workpiece. The working time, temperature and power of each link in the equipment can be set as required; Double confirmation buttons are used for equipment loading, and safety gratings are equipped to ensure the safety of operators. Independent control cabinets are equipped with cantilever control panels at the loading and unloading stations. wait. You can visit our website senfuai.com at any time if you have any needs!