我们知道，喷淋清洗机是通过动力装置使高压柱塞泵产生高压水来冲洗物体表面的机器。它能将污垢剥离、冲走，达到清洗物体表面的目的。这里就涉及到今天我们要谈到的话题，下面来看看怎么进行正确的操作事项吧。

As we know, the spray washer is a machine that uses the power device to make the high-pressure plunger pump produce high-pressure water to wash the surface of objects. It can peel and wash away the dirt to clean the surface of the object. How about high-pressure spray cleaning? Here comes the topic we want to talk about today. Let's see how to operate correctly.

1、当操作喷淋清洗机时：始终需戴适当的护目镜，手套和面具。

1. When operating the spray washer: Always wear appropriate goggles, gloves and masks.

2、始终让保持手和脚不接触清洗喷嘴。

2. Keep hands and feet away from the cleaning nozzle at all times.

3、经常要检查所有的电接头。

3. Always check all electrical connectors.

4、经常检查所有的液体。

4. Check all fluids regularly.

5、经常检查软管是否有裂缝和泄漏处。

5. Check the hose frequently for cracks and leaks.

6、当未使用喷枪时，总是需将设置扳机处于安全锁定状态。

6. When the spray gun is not used, it is always necessary to set the trigger in the safe locking state.

7、总是尽可能地使用低压力来工作，但这个压力要能足以完成工作。

7. Always work with as little stress as possible, but with enough stress to get the job done.

8、在断开软管连接之前，总是要先释放掉清洗机里的压力。

8. Always release the pressure in the washer before disconnecting the hose.

9、每次使用后总是要排干净软管里的水。

9. Always drain the hose after each use.

10、决不要将喷枪对着自己或其他人。

10. Never point the spray gun at yourself or others.

11、在检查所有软管接头都已在原位锁定之前，决不要启动设备。

11. Never start the equipment before checking that all hose connections have been locked in place.

12、在接通供应水并让适当的水流过喷枪杆之前，决不要启动设备。然后将所需要的清洗喷嘴连接到喷枪杆上。

12. Never start the equipment before connecting the supply water and letting the appropriate water flow through the gun barrel. Then connect the required cleaning nozzle to the spray gun rod.

注意：不要让喷淋清洗机在运转过程中处于无人监管的状态！每次当你释放扳机时泵将运转在旁路模式下。如果一个泵已经在旁路模式下运转了较长时间后，泵里循环水的过高温度将缩短泵的使用寿命甚至损坏泵。所以，应避免使设备长时间运行在旁路模式。关注我们senfuai.com，了解更多！

Note: Do not leave the spray washer unattended during operation! The pump will operate in bypass mode each time you release the trigger. If a pump has been operating in bypass mode for a long time, the excessive temperature of circulating water in the pump will shorten the service life of the pump and even damage the pump. Therefore, it shall be avoided to make the equipment operate in bypass mode for a long time. Follow us at senfuai.com to learn more!