为了将清洗消毒机等处理设备的效率性能更大化，对设备及其部件进行常规检查是非常重要的。所以说清洗机检查的一些关键点要知道，下面来讲讲吧。

In order to maximize the efficiency and performance of treatment equipment such as cleaning and disinfection machines, it is very important to carry out routine inspection of equipment and its components. So we should know some key points of cleaning machine inspection. Let's talk about it next.

喷嘴无污染或堵塞。如果孔口堵塞，就会阻碍水流和水压，影响清洗机的性能。清洗机的水在清洗循环过程中被循环利用，其中携带的污染物可能停留在喷淋臂内。喷淋臂应定期清洗。

The nozzle is free of pollution or blockage. If the orifice is blocked, the water flow and water pressure will be blocked, affecting the performance of the cleaning machine. The water of the cleaning machine is recycled during the cleaning cycle, and the pollutants carried in it may stay in the spray arm. The spray arm should be cleaned regularly.

喷淋臂上的出水孔面向目标表面。部分清洗机的喷臂在使用过程中松动和旋转，导致喷臂不能面向仪器。许多喷臂两侧都有孔；这些孔可以向上或向下调整。

The water outlet hole on the spray arm faces the target surface. The spray arm of some cleaning machines loosens and rotates during use, resulting in that the spray arm cannot face the instrument. Many spray arms have holes on both sides; These holes can be adjusted up or down.

清洗机底部的排水屏上无杂物：清洗机底部的排水屏会保留仪表组的污染物。筛网至少每天拆下清洗一次，或根据使用次数增加清洗次数。堵塞的筛网会阻碍水流和排水，从而影响清洗机的清洗效果。

There are no sundries on the drainage screen at the bottom of the washing machine: the drainage screen at the bottom of the washing machine will retain the pollutants of the instrument cluster. The screen shall be removed and cleaned at least once a day, or the cleaning times shall be increased according to the times of use. The blocked screen will block the water flow and drainage, thus affecting the cleaning effect of the cleaning machine.

喷淋臂衬套完好无损：确保所有衬套、联轴器、垫圈等完好无损，无裂缝或损坏。

Spray arm bushing intact: ensure that all bushings, couplings, washers, etc. are intact without cracks or damage.

洗涤剂/化学品输送管道清晰、功能齐全：目视检查所有洗涤剂和其他化学品输送管道及连接端口，确保管道畅通、清洁、无堵塞、堵气、无扭结。还应检查管道上的磨损痕迹、损坏或泄漏。如果输送管道有缺陷，清洗液的浓度可能不正确，从而使清洗周期失效。

Detergent / chemical transmission pipelines are clear and fully functional: visually inspect all detergent and other chemical transmission pipelines and connection ports to ensure that the pipelines are unblocked, clean, free of blockage, air blockage and kink. The pipes should also be checked for signs of wear, damage or leakage. If the delivery pipeline is defective, the concentration of cleaning solution may be incorrect, which will invalidate the cleaning cycle.

检查所有化学品和清洗剂的浓度是否正确：确保清洗剂和其他化学品容器内的余量充足，并确保输配管道正确连接到相应的容器上。

Check whether the concentration of all chemicals and cleaning agents is correct: ensure that the residue in the containers of cleaning agents and other chemicals is sufficient, and ensure that the transmission and distribution pipelines are correctly connected to the corresponding containers.

山东超声波清洗机厂家建议您要观察清洗机的整体状况：机舱内表面应清洁，无污垢、水垢等污染物。这些都会影响清洗机的性能和清洗效果。污渍和水垢可能表明水质问题，化学物质浓度高等。确保所有适用的垫圈、密封圈和记录仪处于正常状态。

Shandong ultrasonic cleaning machine manufacturer recommends you to observe the overall condition of the cleaning machine: the inner surface of the engine room should be clean and free of dirt, scale and other pollutants. These will affect the performance and cleaning effect of the cleaning machine. Stains and scale may indicate water quality problems and high chemical concentrations. Ensure that all applicable gaskets, seals, and recorders are in good condition.

只有做好清洗机前期的测试及检查，才能确保清洗机设备完好，能投入到工作中使用，才能更大化的提供清洗效果，更对相关内容就来我们网站senfuai.com咨询吧。

Only by doing a good job in the early testing and inspection of the washing machine can we ensure that the washing machine equipment is in good condition, can it be put into use in work, and can we provide a greater cleaning effect. For more relevant content, please come to our website senfuai.com for consultation.