启航彩

 欢迎访问启航彩网站!

专注生产工业用超声波清洗机

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-新闻资讯操作喷淋清洗机时建议注意多个细节
新闻资讯

操作喷淋清洗机时建议注意多个细节

作者:admin来源:http://senfuai.com/时间:2022-07-23

我们知道,喷淋清洗机是通过动力装置使高压柱塞泵产生高压水来冲洗物体表面的机器。它能将污垢剥离、冲走,达到清洗物体表面的目的。操作喷淋清洗机时建议注意多个细节,具体内容:
As we know, the spray cleaning machine is a machine that uses the power device to make the high-pressure plunger pump produce high-pressure water to wash the surface of objects. It can peel off and wash away the dirt, so as to achieve the purpose of cleaning the surface of the object. When operating the spray washer, it is recommended to pay attention to several details, specifically:
1、当操作喷淋清洗机时:始终需戴适当的护目镜,手套和面具。
1. When operating the spray washer: always wear appropriate goggles, gloves and masks.
2、始终让保持手和脚不接触清洗喷嘴。
2. Always keep hands and feet away from the cleaning nozzle.
3、经常要检查所有的电接头。
3. Always check all electrical connectors.
4、经常检查所有的液体。
4. Check all liquids frequently.
5、经常检查软管是否有裂缝和泄漏处。
5. Always check the hose for cracks and leaks.
6、当未使用喷枪时,总是需将设置扳机处于安全锁定状态。
6. When the spray gun is not used, always put the setting trigger in a safe locking state.
7、总是尽可能地使用低压力来工作,但这个压力要能足以完成工作。
7. Always use low pressure to work as much as possible, but this pressure should be enough to complete the work.
喷淋清洗机
8、在断开软管连接之前,总是要先释放掉清洗机里的压力。
8. Always release the pressure in the washer before disconnecting the hose.
9、每次使用后总是要排干净软管里的水。
9. Always drain the water in the hose after each use.
10、决不要将喷枪对着自己或其他人。
10. Never point the spray gun at yourself or others.
11、在检查所有软管接头都已在原位锁定之前,决不要启动设备。
11. Never start the equipment until you check that all hose connections are locked in place.
12、在接通供应水并让适当的水流过喷枪杆之前,决不要启动设备。然后将所需要的清洗喷嘴连接到喷枪杆上。
12. Never start the equipment before connecting the supply water and letting the appropriate water flow through the shotgun barrel. Then connect the required cleaning nozzle to the spray gun rod.
每次当你释放扳机时泵将运转在旁路模式下。如果一个泵已经在旁路模式下运转了较长时间后,泵里循环水的过高温度将缩短泵的使用寿命甚至损坏泵。所以,应避免使设备长时间运行在旁路模式。
Each time you release the trigger, the pump will run in bypass mode. If a pump has been running in bypass mode for a long time, the excessive temperature of circulating water in the pump will shorten the service life of the pump and even damage the pump. Therefore, long-term operation of the equipment in bypass mode should be avoided.
做到上述几点,相信你的清洗机可以发挥更大的效力。更多喷淋清洗机的相关知识,关注我们senfuai.com,让你的清洗机发挥大的优势!
Do the above, I believe your cleaning machine can play a greater role. For more knowledge about spray cleaning machines, pay attention to us at senfuai.com, so that your cleaning machine can play a big advantage!