这里的通过式喷淋清洗机包括主机架和固定连接在主机架一侧的子架。主机架上部设有一组首尾相连的下壳体，上壳体与下壳体配合设置。下盖的开口相对固定连接，形成供清洗篮通过的通道。该通道从前到后分为进料口、喷淋室、干燥室和出料口。该通道配有传送清洁篮的传动装置。设备。

The through type spray cleaning machine here comprises a main frame and a sub frame fixedly connected to one side of the main frame. The upper part of the main frame is provided with a group of lower shells connected end to end, and the upper shell is matched with the lower shell. The opening of the lower cover is relatively fixedly connected to form a channel for the cleaning basket to pass through. The passage is divided into feed inlet, spray chamber, drying chamber and discharge outlet from front to back. This channel is equipped with a drive to transfer the cleaning basket. Equipment.

雾化室上端设有除雾装置，干燥室通过风道与热循环风机相连，副架上设有一组药液罐和水罐，与喷房相连。有电加热管，药液箱和水箱通过出水管路与高压喷淋泵进口连接，高压喷淋泵出口通过布袋除尘器连接。布袋除尘器与设置在雾化室内的喷淋器连接。淋浴集成管道连接。

The upper end of the atomization chamber is equipped with a demister, the drying chamber is connected with the thermal circulation fan through an air duct, and a group of liquid medicine tanks and water tanks are set on the sub frame, which are connected with the spray room. There is an electric heating pipe, the liquid medicine tank and water tank are connected with the inlet of the high-pressure spray pump through the water outlet pipeline, and the outlet of the high-pressure spray pump is connected through the bag filter. The bag type dust collector is connected with the sprayer arranged in the atomization room. Shower integrated piping connections.

该产品的有益效果是通过在开模（脱模）前增加喷淋清洗工序，可以更好地清洗附着在玻璃模具非工作面的原材料，降低后续工序的清洗依从性，并提高成本。生产效率高，整机结构设计合理，密封效果好，可防止漏液、漏气，便于操作、维护和清洗。

The beneficial effect of the product is that by adding a spray cleaning process before mold opening (demoulding), the raw materials attached to the non working surface of the glass mold can be better cleaned, the cleaning compliance of the subsequent process can be reduced, and the cost can be increased. It has high production efficiency, reasonable structure design and good sealing effect, which can prevent liquid and gas leakage, and is convenient for operation, maintenance and cleaning.

另外，当光学镜片处于清洗介质喷淋状态时，用清洗剂喷淋和清水清洗后，再用热风吹干，对光学镜片表面进行清洗，对玻璃模具和玻璃进行清洗。树脂镜片得到改进。度，提高生产效率，降低成本。

In addition, when the optical lens is in the cleaning medium spray state, spray it with cleaning agent and clean it with water, and then dry it with hot air to clean the surface of the optical lens, and clean the glass mold and glass. The resin lens has been improved. Degree, improve production efficiency and reduce costs.

该产品还提供了一种通过式喷淋清洗机的清洗方法，包括以下步骤：

The product also provides a cleaning method of a through spray cleaning machine, which includes the following steps:

用清洗剂配制清洗液，清洗液含有60-80%的水和20-40%的中性清洗剂，两者之和为100%；

Prepare cleaning solution with cleaning agent. The cleaning solution contains 60-80% water and 20-40% neutral cleaning agent, and the sum of the two is 100%;

药液罐加入清洗液，水罐加清水后，控制器控制电热管开始加热药液罐和水罐内的液体，使温度达到工作温度85℃±5℃；当水箱和水箱加热时，控制器控制加热管和热循环风机启动，对烘房进行预热，使室内温度达到烘房温度；

Add cleaning liquid to the liquid medicine tank and add clean water to the water tank. The controller controls the electric heating tube to heat the liquid in the liquid medicine tank and the water tank to make the temperature reach the working temperature of 85 ℃± 5 ℃; When the water tank and the water tank are heated, the controller controls the heating pipe and the thermal circulating fan to start to preheat the drying room so that the indoor temperature reaches the drying room temperature;

将玻璃模具放入清洗篮中，将清洗篮置于清洗机进料口，控制器控制减速电机启动，清洗篮由传动装置输送清洗机内部进行清洗。加工;

Put the glass mold into the cleaning basket, place the cleaning basket at the feeding port of the cleaning machine, the controller controls the start of the reduction motor, and the cleaning basket is transported to the inside of the cleaning machine by the transmission device for cleaning. Processing;

清洗篮开始输送后，控制器控制高压喷淋泵启动，在喷淋室内依次用药液和清水清洗玻璃模具。同时，液位控制器的探头采集药液罐或水罐内的水位信息并传输。对于液位控制器，液位控制器判断是液箱还是水箱需要注液。如果液位控制器需要控制电磁阀打开加液，如果没有，电磁阀关闭；

After the cleaning basket starts to be transported, the controller controls the start of the high-pressure spray pump, and cleans the glass mold with liquid and clean water in the spray room in turn. At the same time, the probe of the liquid level controller collects and transmits the water level information in the liquid medicine tank or water tank. For the level controller, the level controller determines whether the liquid tank or the water tank needs to be filled with liquid. If the liquid level controller needs to control the solenoid valve to open and add liquid, if not, the solenoid valve will close;

玻璃模具清洗干净后，进入烘房。在烘房内，对玻璃模具进行热风风切干燥处理15-30分钟；玻璃模具干燥后，通过出料口离开清洗机。

After the glass mold is cleaned, enter the drying room. In the drying room, the glass mold shall be cut and dried by hot air for 15-30 minutes; After the glass mold is dried, it leaves the cleaning machine through the discharge port.

一种通过式喷淋清洗机及其清洗方法的相关内容讲解完毕，您可以来我们网站senfuai.com关注相关资讯，更好的使用清洗机进行工作！

After explaining the relevant contents of a pass through spray cleaning machine and its cleaning method, you can come to our website www.jnthcsb Pay attention to relevant information and better use the cleaning machine!