超声波清洗是一种在工业上应用广泛、效果良好的清洗方法。它的工作原理是超声波在清洗液中传播时，清洗液中的微小气泡在声场的作用下发生振动。当声压达到一定值时，气泡会迅速增长。

Ultrasonic cleaning is a widely used and effective cleaning method in industry. Its working principle is that when the ultrasonic wave propagates in the cleaning solution, the tiny bubbles in the cleaning solution vibrate under the action of the sound field. When the sound pressure reaches a certain value, the bubbles will grow rapidly.

然后，关闭瞬间的爆破产生的冲击波可以达到数千个大气压。冲击波降低污渍与被清洗工件的附着力，可以破坏不溶性污渍，使之分散在清洗液中，从而达到清洗的目的。虽然气泡的爆裂能量很高，但由于每个气泡的体积很小，不会对工件造成机械损伤和明显的温升。

Then, the shock wave generated by the blasting at the moment of closing can reach thousands of atmospheres. The shock wave reduces the adhesion between the stain and the cleaned workpiece, which can destroy the insoluble stain and disperse it in the cleaning solution, so as to achieve the purpose of cleaning. Although the burst energy of bubbles is very high, because the volume of each bubble is very small, it will not cause mechanical damage and obvious temperature rise to the workpiece.

为了更加节能、环保、经济，清洁行业不断转型升级。超声波作为一种清洗方式，越来越受到清洗企业的青睐。对于一些高产企业来说，每天需要清洗大量的工件，传统的清洗方式已经不能满足需求。普通单槽、多槽、机械臂超声波清洗机无法满足清洗速度的要求，超声波清洗机可以弥补不足。，显然是大多数企业的选择。

In order to be more energy-saving, environmental protection and economic, the cleaning industry continues to transform and upgrade. As a cleaning method, ultrasonic is more and more favored by cleaning enterprises. For some high-yield enterprises, a large number of workpieces need to be cleaned every day, and the traditional cleaning method can not meet the demand. Ordinary single tank, multi tank and mechanical arm ultrasonic cleaning machine can not meet the requirements of cleaning speed, and the ultrasonic cleaning machine can make up for the deficiency., Obviously, it is the choice of most enterprises.

超声波清洗机具有美观、经济、实用、节能环保、高效稳定、清洗效果好等优点。自动清洗由PLC控制完成。主要由：超声波清洗、超声波漂洗（喷淋）、风切、循环热风干燥等组成（根据客户实际需要设计各工艺环节）。

Ultrasonic cleaning machine has the advantages of beauty, economy, practicality, energy conservation and environmental protection, high efficiency and stability, good cleaning effect and so on. Automatic cleaning is controlled by PLC. It is mainly composed of ultrasonic cleaning, ultrasonic rinsing (spraying), air cutting, circulating hot air drying, etc. (each process link is designed according to the actual needs of customers).

超声波清洗机使用注意事项：清洗机的电源和电加热器的电源必须有良好的接地装置。严禁无清洗液启动清洗机，即清洗槽不加一定量的清洗液，不得开启超声波开关。对于有加热设备的清洗设备，严禁在没有液体的情况下打开加热开关。

Precautions for the use of ultrasonic cleaning machine: the power supply of cleaning machine and electric heater must have good grounding device. It is forbidden to start the cleaning machine without cleaning fluid, that is, the cleaning tank does not add a certain amount of cleaning fluid, and the ultrasonic switch shall not be turned on. For cleaning equipment with heating equipment, it is strictly prohibited to turn on the heating switch without liquid.

山东超声波清洗机提醒大家，禁止用重物（铁件）撞击清洗筒底部，以免损坏换能器芯片。超声波发生器电源应使用220V/50Hz单电源，并配备2000W以上的稳压器。清洗槽底部应定期冲洗，不得有过多杂物或污垢。每次更换新液时，只有在超声波启动后才能清洗零件。

Shandong ultrasonic cleaning machine reminds you that it is forbidden to hit the bottom of the cleaning cylinder with heavy objects (iron parts) to avoid damaging the transducer chip. The power supply of ultrasonic generator shall be 220V / 50Hz single power supply and equipped with voltage regulator above 2000W. The bottom of the cleaning tank shall be washed regularly without too much sundries or dirt. Each time a new fluid is replaced, the parts can be cleaned only after the ultrasonic wave is started.

超声波清洗机清洗效果好要知道注意事项便是以上所讲解的内容了，当然使用过程中是需要对其进行维护保养的，只有这样才能让清洗机的使用寿命延长，更多资讯就来关注网站senfuai.com了解吧。

The ultrasonic cleaning machine has good cleaning effect. The precautions are explained above. Of course, it needs to be maintained during use. Only in this way can the service life of the cleaning machine be prolonged. For more information, please pay attention to the website www.jnthcsb See. Com.