通过式清洗机的使用，采用不锈钢链条输送形式，通过式喷水清洗线。根据多种复杂工件的清洗、多孔、深孔特点，在清洗、干燥过程中设置低速旋转，保证清洗、切水、隧道式烘干、防锈等要求采用链条稳定输送形式，设计的通过式喷淋清洗烘干干线。

The use of through type cleaning machine adopts the form of stainless steel chain transportation and through type water spray cleaning line. According to the characteristics of cleaning, porous and deep holes of various complex workpieces, low-speed rotation is set in the process of cleaning and drying to ensure the requirements of cleaning, water cutting, tunnel drying and rust prevention. The chain stable conveying form is adopted, and the professionally designed through spray cleaning and drying trunk line is adopted.

对于一些特殊的清洗对象，还应配备热空气干燥过滤循环系统，专用清洗架(篮)和清洗液。通过式超声波清洗机的主要功能，一是防止高光亮度物体的外貌受到损害，二是可以去除附着在外貌上的亚微米大小的颗粒。

启航彩For some special cleaning objects, hot air drying filtration circulation system, special cleaning rack (basket) and cleaning solution shall also be equipped. The main functions of the pass through ultrasonic cleaning machine are to prevent the appearance of high brightness objects from being damaged, and to remove submicron particles attached to the appearance.

浸在液体中，面向传感器的一面可以被清洗，因此要停止两面的清洗。经式清洁机操作注意事项： a、被清洁的部件应整齐地放置于输送带上，不得压在滚轮上;被清洁的部件应放置在输送带上，不得堆叠过度，以免影响清洁效果。

When immersed in liquid, the side facing the sensor can be cleaned, so stop cleaning both sides. Precautions for the operation of the warp Cleaner: a. the cleaned parts shall be placed neatly on the conveyor belt and shall not be pressed on the roller; The cleaned parts shall be placed on the conveyor belt and shall not be stacked too much, so as not to affect the cleaning effect.

工作结束后，清洗过的部件不能停在运输带上，按下终止键，整个机器就停止运行了。清洁机采用不同的方法对包装容器、包装材料、包装辅助材料、包装件等进行清洗，达到预期的清洁级别。清洗液应定时加入水和一定比例的金属清洁剂，以补偿消耗，使液面保持在一定高度，如果清洗效果达不到常规技术要求，则应悉数更换清洗液。

启航彩After the work, the cleaned parts cannot stop on the conveyor belt. Press the stop key and the whole machine will stop running. The cleaning machine uses different methods to clean the packaging containers, packaging materials, packaging auxiliary materials and packaging parts, so as to achieve the expected cleaning level. Water and a certain proportion of metal cleaner shall be regularly added to the cleaning solution to compensate the consumption and keep the liquid level at a certain height. If the cleaning effect fails to meet the conventional technical requirements, all the cleaning solutions shall be replaced.

启航彩通过式清洗机清洗过程：自动上料→超声清洗(抛动)→超声精洗(抛动)→超声漂洗(抛动)→超声漂洗(抛动)→鼓泡漂洗(抛动)→鼓泡漂洗(抛动)→防锈漂洗(抛动)→热风干燥→热风干燥→自动下料。

启航彩Cleaning process of pass through cleaner: automatic feeding → ultrasonic cleaning (throwing) → ultrasonic fine cleaning (throwing) → ultrasonic rinsing (throwing) → ultrasonic rinsing (throwing) → bubbling rinsing (throwing) → bubbling rinsing (throwing) → antirust rinsing (throwing) → hot air drying → hot air drying → automatic feeding.

以上就是小编为您提供的关于超声波清洗设备的知识，更多的精彩内容请您继续关注我们的网站：http://senfuai.com，我们会有更多对的精彩内容 为您分享.

启航彩The above is the knowledge about ultra ultrasonic cleaning equipment provided by Xiaobian. Please continue to pay attention to our website for more wonderful contents: http://senfuai.com , we will have more wonderful content for you to share