启航彩自研发以来，超声波清洗设备逐渐投入各个领域，并逐渐投入实际应用，因此越来越多的人愿意使用这些装置。但是，由于超声波清洗设备制造商对设备不熟悉并且无法了解很多人，因此有人发现提醒大家购买超声波清洗设备需要注意四件事。

Since the research and development, ultrasonic cleaning equipment has been gradually put into various fields, and gradually put into practical application, so more and more people are willing to use these devices. However, because the manufacturers of ultrasonic cleaning equipment are not familiar with the equipment and can not understand many people, it is found that there are four things to pay attention to when purchasing ultrasonic cleaning equipment.

1.看看功率。

启航彩1. Look at the power.

启航彩超声波清洗设备的清洗效果由空化效应的大小决定，功率越大，空化越大，但过大的功率会在清洗液中产生大量的气泡，从而增加清洗膜片的腐蚀。这大大缩短了设备寿命。如果功率太小，清洁效果会变差。因此，用户可以在识别过程中更加注意清洁装置的功率稳定性，并且不应该考虑太多的功率或太少的超声波清洁装置。时间取决于应一次清洗多少产品以确定清洗槽的尺寸。

The cleaning effect of ultrasonic cleaning equipment is determined by the size of cavitation effect. The higher the power, the greater the cavitation. However, if the power is too high, a large number of bubbles will be generated in the cleaning fluid, which will increase the corrosion of cleaning membrane. This greatly shortens the life of the equipment. If the power is too low, the cleaning effect will be poor. Therefore, users can pay more attention to the power stability of the cleaning device in the identification process, and should not consider too much power or too little ultrasonic cleaning device. The time depends on how many products should be cleaned at a time to determine the size of the tank.

2.超声波清洗机清洁剂选择：

2. Selection of cleaning agent for ultrasonic cleaning machine:

洗涤剂是长期使用该设备的消耗品，该洗涤剂分为有机溶剂和含水洗涤剂。根据配方有数千种类型，每个清洁剂根据清洁剂的材料，特性和灰尘选择清洁剂。通常，灰尘可以快速彻底地清洁，但不能清洁。外观破坏工作至关重要。

Detergents are consumables for long-term use of the equipment. The detergents are divided into organic solvent and water containing detergent. There are thousands of types depending on the formulation, and each cleaner is selected based on the material, properties and dust of the cleaner. Generally, dust can be cleaned quickly and thoroughly, but it cannot be cleaned. Appearance damage is essential.

启航彩3.注意直接流动的问题。

3. Pay attention to the problem of direct flow.

在一定程度上引入沿着声音的传播方向流动的液体中产生的超声波时，球在垂直于视线流量振荡的平面的流被称为不可缺少现象超声波清洗设备制造商发生直流声强度，流速也通常这已得到修复。用于细灰尘表面清洁灰尘的油流线再现处理，清洗液的表面污染也产生了很大的作用搅拌新的液体和溶解在液体中的对流用于溶解快速溶解的混合土壤。因此，在购买时确保直径流量符合您的要求是个好主意。

When the ultrasonic wave generated in the liquid flowing along the direction of sound propagation is introduced to a certain extent, the flow of the ball in the plane perpendicular to the line of sight flow oscillation is called indispensable phenomenon. The ultrasonic cleaning equipment manufacturer has direct current sound intensity, and the flow rate is usually repaired. For the oil streamline reproduction treatment of clean dust on the surface of fine dust, the surface pollution of cleaning fluid also has a great effect on stirring new liquid and convection dissolved in liquid to dissolve rapidly dissolved mixed soil. Therefore, it is a good idea to make sure that the diameter flow meets your requirements when purchasing.

4.噪声问题的考虑

4. Consideration of noise

如果要产生低频噪声，请考虑选择合适的频率以便进行简单操作。在其中要求去除的灰尘，而不对工件表面的损坏的高性能应用中，较低的清洗频率在范围内选择的频率范围内常常用于清洁一个大而重的部件或高密度材料保持的正常清洗频率。超声波清洗设备制造商还报告经常使用清洁低频的小而精细的部件或去除小颗粒。

启航彩If you want to generate low frequency noise, consider selecting the appropriate frequency for simple operation. In high performance applications where dust removal is required without damage to the surface of the workpiece, a lower cleaning frequency is often used to clean a large, heavy part or high-density material within a selected frequency range. Manufacturers of ultrasonic cleaning equipment also report frequent use of small, fine components or removal of small particles at low frequencies.