旋转喷淋清洗机由于清洗零件种类和结构的多样化和复杂性及生产批量要求不同等，机械加工等制造行业中。要求清洗设备具有清洗效果好、适应性好、生产率高、操作方便和工人劳动强度低等特点，一般的激进清洗工艺流程为：清洗液清洗一漂洗一真空干燥。

Due to the diversity and complexity of the cleaning parts and the different production batch requirements of the cleaning parts, the rotary spray cleaning machine is widely used in the manufacturing industry such as machining. The cleaning equipment is required to have the characteristics of good cleaning effect, good adaptability, high productivity, easy operation and low labor intensity of workers. The general radical cleaning process is: cleaning with cleaning solution rinsing vacuum drying.

经过前一级超声真空清洗的零件上仍会残留少量受污染的清洗液，真空漂洗系统是为将污染的清洗液及少量二次附着的污物冲刷替换掉，从而进一步提高清洗效果并得到稳定的清洗质量。

启航彩A small amount of contaminated cleaning fluid will remain on the parts after the previous ultrasonic vacuum cleaning. The vacuum rinsing system is to wash and replace the contaminated cleaning fluid and a small amount of secondary attached dirt, so as to further improve the cleaning effect and obtain stable cleaning quality.

启航彩其循环系统与超声波真空清洗工艺系统相似，利用循环泵使漂洗槽内清洗液往复循环并过滤，保证清洗液的工作洁净度。漂洗方式通常有两种：浸洗和冲洗。使用两种方式，将清洗笼完全浸没在清洗液中，而清晰液在进行循环的同事其到对圆珠笔头的冲洗作用。

启航彩The circulation system is similar to the ultrasonic vacuum cleaning process system. The circulating pump is used to make the cleaning solution in the rinsing tank circulate and filter to ensure the working cleanliness of the cleaning fluid. There are usually two ways of rinsing: soaking and washing. In two ways, the cleaning cage is completely immersed in the cleaning solution, and the cleaning liquid in the circulation can wash the ball point pen head.