通过式清洗机用于冲洗过滤液压体系在制作、装配、使用过程及保护时生成或侵入的污染物;也能够适用于对作业油液的定期保护过滤，提高清洁度，防止或削减因污染而形成的故障，然后保证液压体系设备的高性能、高可靠度和长寿命。下面来讲下它的正确的安全的操作事项吧。

The pass-through cleaner is used to wash the pollutants generated or intruded during the production, assembly, use and protection of the filtration hydraulic system; It can also be applied to the regular protection and filtration of the operating oil, improve the cleanliness, prevent or reduce the failure caused by pollution, and then ensure the high performance, high reliability and long life of the hydraulic system equipment. Let's talk about its correct and safe operation.

检查事项

Inspection items

a、查看管路体系有无漏气漏水的状况，如有这种状况，应告诉维修人员修理。

A. Check whether the pipeline system has air and water leakage. If so, tell the maintenance personnel to repair it.

b、查看清洗液是否足够，如果不行，及时添加清洗液。

B. Check whether the cleaning solution is sufficient. If not, add the cleaning solution in time.

c、先点动试车，然后空作业2-3分钟，查看传动体系(电动机、联轴节、减速器)和运送带的运动是否平稳，确认一切正常后，方可进行出产。

C. First jog the test run, and then idle for 2-3 minutes to check whether the drive system (motor, coupling, reducer) and the conveyor belt are moving smoothly, and confirm that everything is normal before production.

d、开启浮油扫除设备(不带浮油扫除设备在外)开始浮油扫除，因此时水泵尚开启，水面安静，排油作用好，待浮油根本扫除后停止除油，排油污多克利用午休时刻进行。

D. Start the oil slick cleaning equipment (without the oil slick cleaning equipment) to start the oil slick cleaning. Therefore, the water pump is still on, the water surface is quiet, and the oil drainage function is good. After the oil slick is completely cleaned, stop the oil removal. The oil pollution drainage can be carried out at noon break.

操作事项

Operating matters

a、被清洗的零件要整齐地放在运送带上，不许压在滚轮上;

A. The cleaned parts shall be neatly placed on the conveyor belt and shall not be pressed on the roller;

b、在运送带上，被清洗的零件不能堆得过多，以免影响清洗作用。

B. On the conveyor belt, the cleaned parts should not be piled too much to avoid affecting the cleaning effect.

c、作业后，被清洗的零件不能停放在运送带上，按停止按钮，使全机停止运行。

C. After operation, the cleaned parts cannot be parked on the conveyor belt. Press the stop button to stop the whole machine.

d、清洗液应定期添加水和一定份额的金属清洗剂以补充耗费，使液面保持在一定高度，如果清洗作用达不到规则的工艺要求时，应悉数更换清洗液。

D. The cleaning fluid shall be regularly added with water and a certain amount of metal cleaning agent to supplement the consumption, so as to keep the liquid level at a certain height. If the cleaning effect fails to meet the regular process requirements, the cleaning fluid shall be completely replaced.

注意，选购通过式清洗机时，如果想要有正确选择的话，是需要做到以下这两点，一是产品在选购前要做一些准备工作，而且是要认真对待和进行，好做到心中有数，二是进行产品选购时，要将其所有相关因素进行全面和综合考虑，这样可避免在考虑过程中出现问题，进而，影响到选购者的准确判断和正确选择。更多相关事项就来联系我们http://senfuai.com吧！

Note that if you want to make a correct choice when purchasing a walk-through cleaner, you need to do the following two things: first, you should do some preparatory work before purchasing the product, and you should take it seriously and carry it out so that you can have a good idea; second, you should take all relevant factors into consideration when purchasing the product, so that you can avoid problems in the process of consideration, and then, It affects the accurate judgment and correct choice of the buyer. Contact us for more relevant matters http://senfuai.com Come on!