碳氢清洗机清洗范围广，与传统的清洗方式有很大的差别，今天小编就来和大家说说传统清洗模式和碳氢清洗机的不同之处。

The hydrocarbon cleaning machine has a wide range of cleaning, which is very different from the traditional cleaning method. Today, I will tell you the difference between the traditional cleaning mode and the hydrocarbon cleaning machine.

一、工厂不购买碳氢清洗机设备（不知道自动碳氢清洗机的存在，或暂时不考虑购买）。当工件上有油污时，工厂直接在市场上购买清洁剂，并将其全部浸泡在工件上。如果污染物较少，则浸泡一晚，如果污染物严重，则浸泡一两天。他们采用这种浸泡方法去除工件上的油污，虽然在大多数情况下可以溶解油污，但这是非常耗时和费力的。

1、 The factory does not purchase hydrocarbon cleaning machine equipment (the existence of automatic hydrocarbon cleaning machine is unknown, or the purchase is not considered temporarily). When there is oil stain on the workpiece, the factory directly purchases detergent on the market and immerses it on the workpiece. If there are less pollutants, soak for one night, and if the pollutants are serious, soak for one or two days. They use this immersion method to remove the oil stain on the workpiece. Although the oil stain can be dissolved in most cases, it is very time-consuming and laborious.

二、工厂已经购买了设备，但他们经常选择功能相对单一的清洁设备，即只有清洁和干燥功能，有些甚至没有干燥功能，而自动碳氢清洗机则不同。清洁、干燥、蒸馏和回收集合在一起，整个过程自动化。

2、 The factory has purchased equipment, but they often choose cleaning equipment with relatively simple functions, that is, only cleaning and drying functions, and some even have no drying function, while automatic hydrocarbon cleaning machines are different. Cleaning, drying, distillation and recycling are integrated and the whole process is automated.

不愿意更换设备的人认为只要有超声波清洗就可以了。这些工厂通常购买几种小型设备，用水基溶剂或其他卤代烃溶剂清洗溶剂。此外，该过程是手动的，相当劳动密集型。虽然超声波清洗比较先进，但不能保证工件盲孔间隙的清洗，这种恒压状态下的清洗效果并不理想。

People who are not willing to replace the equipment think that ultrasonic cleaning is enough. These factories usually buy several small equipment to clean solvent with water-based solvent or other halogenated hydrocarbon solvent. In addition, the process is manual and quite labor-intensive. Although ultrasonic cleaning is relatively advanced, it can not guarantee the cleaning of the blank hole gap of the workpiece, and the cleaning effect under constant pressure is not ideal.

如果对于没有干燥功能的清洁设备，虽然可以清洗工作部件，但如果制造商只是捡起工作部件自然干燥，就会增加工作部件表面生锈的可能性！虽然这些传统的清洁方法有优缺点，但如果缺点大于优点，提前购买清洁设备或更换自动氢清洁机更安全。

If the cleaning equipment without drying function can clean the working parts, but if the manufacturer just picks up the working parts to dry naturally, it will increase the possibility of rust on the surface of the working parts! Although these traditional cleaning methods have advantages and disadvantages, if the disadvantages outweigh the advantages, it is safer to purchase cleaning equipment in advance or replace the automatic hydrogen cleaner.

工件，特别是有盲孔间隙的工件清洗干净，在外观上得到客户的认可，不仅可以提高他们的声誉，而且可以避免客户不损失！

Workpieces, especially those with blind hole gaps, are cleaned and accepted by customers in appearance, which can not only improve their reputation, but also avoid customers' loss!

碳氢清洗机设备优于传统清洗模式的之处就讲解完毕了，您对此有这样的疑惑或者需求，就来我们网站http://senfuai.com进行咨询吧！

The advantages of the hydrocarbon cleaning machine over the traditional cleaning mode are explained. If you have such doubts or needs, please come to our website http://senfuai.com Consult!