如今越来越多的行业都使用清洗机来提升工作效率，达到理想的效果。高压去毛刺清洗机其实并不是一款简单的清洁设备，更多的是一款除垢除锈强化设备。下面随着小编一起来认识一下高压去毛刺清洗机的一个问题吧。

Nowadays, more and more industries are using cleaning machines to improve work efficiency and achieve ideal results. The high-pressure deburring and cleaning machine is not a simple cleaning equipment, but more a scaling and rust removal strengthening equipment. Let's learn about a problem of high-pressure deburring and cleaning machine with Xiaobian.

1.高压去毛刺清洗机开启后水泵有异响或压力不稳定，未达到机器额定压力。

1. After the high-pressure deburring and cleaning machine is started, the water pump makes abnormal noise or the pressure is unstable, which does not reach the rated pressure of the machine.

A.检查进水管是否有水，送水管（喷水枪）是否打开，避免进水管路水时有时无且无空气进入。

A. Check whether there is water in the water inlet pipe and whether the water supply pipe (water spray gun) is opened to prevent water and air from entering the water inlet pipe.

B.供水不足，检查吸水管尺寸，如有必要可换用直径较大水管，同时查看水有无压力，进水压力太小，直接影响水的供应不充分（如果是直接使用自来水龙头给水，一定要查看管路水流量是否及时供应，且无空气进入，如果是采用外部水源，建议用小型增压泵给机器补水或用自备水箱）。

B. If the water supply is insufficient, check the size of the suction pipe. If necessary, replace the water pipe with a larger diameter. Meanwhile, check whether the water has pressure. If the water inlet pressure is too small, it will directly affect the insufficient supply of water (if the tap is directly used for water supply, check whether the water flow in the pipeline is timely supplied and no air enters. If the external water source is used, it is recommended to use a small booster pump to replenish water for the machine or use a self-contained water tank).

C.调压阀未打开或未有效调节，正确调节阀门并且查看喷嘴，如果喷嘴过大或磨损，应更换喷嘴。

C. The pressure regulating valve is not opened or adjusted effectively. Adjust the valve correctly and check the nozzle. If the nozzle is too large or worn, replace the nozzle.

D.检查活塞密封垫（水封，O型圈）有无磨损并检查机器进水过滤器有无堵塞，清洁过滤器，如果是不清洁的水源造成过滤网经常堵塞，可大外置过滤器，或更换洁净水源。

D. Check whether the piston sealing gasket (water seal, O-ring) is worn and whether the water inlet filter of the machine is blocked. Clean the filter. If the filter screen is often blocked due to unclean water source, the external filter can be enlarged or the clean water source can be replaced.

E.如果是发动机引擎驱动高压去毛刺清洗机，应检查发动机的转速是否调整正常以及皮带是否掉落打滑。

E. If it is an engine driven high-pressure deburring and cleaning machine, check whether the engine speed is adjusted normally and whether the belt falls and slips.

2.高压去毛刺清洗机水泵噪音过大，水泵有压力，但有强烈的脉动和震动。

2. The noise of the water pump of the high-pressure deburring and cleaning machine is too loud. The water pump has pressure, but there is strong pulsation and vibration.

A..水泵轴承损坏，更换轴承或检查高压去毛刺清洗机水泵和动力的连接问题，弹性连轴器有无磨损以及皮带连接有无滑轮的状态。

A. If the water pump bearing is damaged, replace the bearing or check the connection between the water pump and the power of the high-pressure deburring and cleaning machine, whether the elastic coupling is worn, and whether the belt is connected with pulleys.

B.当高压水泵产生强烈的脉动和震动时，应该检查水泵入口处水温是否过高。

B. When the high-pressure water pump generates strong pulsation and vibration, first check whether the water temperature at the inlet of the water pump is too high.

C.阀门里有异物，清洁阀门。

C. There is foreign matter in the valve. Clean the valve.

此外您在选购该设备时要注意，不同生产的清洗机肯定有其突出的优势与细节，这时就看这些细节是不是自己所需求的。更多注意事项就来我们网站senfuai.com咨询了解吧。

In addition, when you buy this equipment, you should pay attention to the fact that cleaning machines produced by different brands certainly have their outstanding advantages and details. At this time, it depends on whether these details are what you need. For more precautions, please visit our website at senfuai.com.