喷淋清洗机在制造业中出现的形式多样，应用范围广泛。在其除油清洗的应用也有结合超声波清洗组成清洗烘干线，而在超声波除油、切削的清洗工艺中其一般作为漂洗工序段，采用自动形式，以减少成本，且能达到效果。那么喷淋清洗机工艺设计要根据什么因素来做呢？

Spray cleaning machines appear in various forms and have a wide range of applications in the manufacturing industry. In its application of oil removal and cleaning, ultrasonic cleaning is also used to form a cleaning and drying line. In the cleaning process of ultrasonic oil removal and cutting, it is generally used as a rinsing process section in an automatic manner to reduce costs and achieve results. So what factors should be considered in the process design of spray cleaning machines?

（1）根据要喷淋清洗工件的污垢具体特点

(1) According to the specific characteristics of the dirt on the workpiece to be sprayed and cleaned

在设计一个清洗工艺时，首先要对污垢的性质、数量以及在清洗表面附着的情况进行了解。通常的清洗工艺和设备都是针对特定的污垢而设计的，一般是先用经济的方法将大部分污垢除去，然后用其他的方法对残留的污垢进行处理，用分步进行的方法组成一个清洗工艺。

When designing a cleaning process, it is important to first understand the nature, amount, and adhesion of dirt on the cleaning surface. Generally, cleaning processes and equipment are designed for specific dirt. Generally, most dirt is removed using economic methods, and then residual dirt is treated using other methods. A step-by-step method is used to form a cleaning process.

（2）对喷淋清洗洗净程度的要求

(2) Requirements for cleaning degree of spray cleaning

在选择清洗工艺及设备时，必须考虑清洗要求达到的喷淋洗净程度。对不同洗净程度要求的清洗应选择不同的清洗工艺和设备。洗净程度要求越高，清洗成本也越高，而且生产成本是以几何级数递增的，但是在某些情况下，为了避免出现因清洗效果不佳而造成损失，选择成本高的清洗工艺和设备也是有必要的，自然就不会把生产的经济性放在首位了。

When selecting cleaning processes and equipment, the degree of spray cleaning required for cleaning must be considered. Different cleaning processes and equipment should be selected for cleaning with different cleaning requirements. The higher the requirement for cleaning degree, the higher the cleaning cost, and the production cost increases in geometric progression. However, in some cases, in order to avoid losses caused by poor cleaning effect, it is also necessary to choose high cost cleaning processes and equipment, which naturally does not place production economy in the first place.

此外喷淋清洗机在使用过程中速度快且操作效果统一，并且其设备内槽与外槽都是使用不锈钢进行制作的。由于设备的工作时间、温度以及功率都是可以自行调节的，因此设备对生产效率的提高有着很大的帮助，并且在一定程度上可以节约不少生产成本。

In addition, the spray cleaning machine is fast in use and has a uniform operating effect, and both the inner and outer grooves of the equipment are made of stainless steel. Due to the fact that the working time, temperature, and power of the equipment can be adjusted by itself, the equipment can greatly help improve production efficiency, and to some extent can save a lot of production costs.

在使用喷淋清洗机设备的过程中，其清洗机的储液箱在槽中没有水或者是溶剂的时候需要对其进行更换，同时在更换的过程对电箱要多加小心，并进行正确的操作及维护保养工作。

During the use of spray cleaning machine equipment, when there is no water or solvent in the tank of the cleaning machine's liquid storage tank, it is necessary to replace it. At the same time, during the replacement process, it is necessary to pay more attention to the electric box, and carry out correct operation and maintenance work.

正是因为喷淋清洗机设备具有工位多、功能齐全、结构合理、操作方便以及清洗效果好等显着的性能特点，因此对于大批量工件的清洗是非常不错的选择。不过同样在操作过程中对于一些操作设备该注意的问题还是需要多加了解并注意，才能够更好的操作使用设备。您有需求就来咨询我们http://senfuai.com吧！

It is precisely because the spray cleaning machine equipment has significant performance characteristics such as multiple stations, complete functions, reasonable structure, convenient operation, and good cleaning effect that it is a very good choice for cleaning large quantities of workpieces. However, it is also necessary to understand and pay attention to some issues that should be paid attention to during the operation process in order to better operate and use the device. If you have any needs, please come to consult us http://senfuai.com Come on!