使用高压去毛刺清洗机实际上是一个柔和的处理过程，适合去除松散的毛刺、粘附的磨屑和抛光后残留的特殊形状毛刺等；另外还可去除深孔、盲孔、狭缝和小孔等难以或人工不能去除的孔内毛刺。并且不会损伤内表面。下面我们主要介绍一下使用高压去毛刺清洗机时高压喷嘴的结构形式选择。

The use of high-pressure deburring cleaning machine is actually a gentle process, which is suitable for removing loose burrs, adhesive abrasive chips and special shaped burrs left after polishing; In addition, it can also remove the burr in the hole that is difficult or cannot be removed manually, such as deep hole, blind hole, slit and small hole. And will not damage the inner surface. Next, we will mainly introduce the structure selection of high-pressure nozzle when using high-pressure deburring cleaning machine.

一、去除深孔内的毛刺

1、 Deburr deep holes

使用高压清洗机去除深孔内的毛刺时，我们可以把锥形的高压喷嘴安装到高压管上，进行往复移动清洗。

When using the high-pressure cleaning machine to remove the burr in the deep hole, we can install the conical high-pressure nozzle on the high-pressure pipe for reciprocating cleaning.

二、去除交叉孔内的毛刺

2、 Deburr the cross hole

使用高压清洗机去除交叉孔内的毛刺时，我们可用直线型喷嘴来解决，而扇形喷嘴负责零件外表面的毛刺清理。

When using the high-pressure cleaner to remove the burrs in the cross hole, we can use the linear nozzle to solve the problem, while the fan-shaped nozzle is responsible for the burr removal on the external surface of the part.

三、较大零件的表面毛刺

3、 Surface burr of larger parts

使用高压清洗机去除较大零件的表面毛刺时，我们把每分钟1500转以上的强力旋转喷嘴安装在自动行走机构上，以完成对较大的磨削表面清理。

When the high-pressure cleaning machine is used to remove the surface burrs of large parts, we install a powerful rotating nozzle with a speed of more than 1500 rpm on the automatic traveling mechanism to complete the cleaning of large grinding surfaces.

四、较大的枪膛类零件毛刺

4、 Large burr of gun bore parts

使用高压清洗机去除较大的枪膛类零件毛刺时，我们将不同朝向的多头喷嘴组合在锥形喷嘴上，高压喷嘴头在往复移动时高速旋转清洗。

When using the high-pressure cleaning machine to remove the burrs of large gun bore parts, we combine the multi-head nozzles with different orientations on the conical nozzle, and the high-pressure nozzle head rotates to clean at high speed when moving back and forth.

我们可以看出不同零件的结构形状及要求决定了高压喷嘴的数量、喷嘴配置以及喷射形式。为了使高压喷嘴具有很强的适应能力，我们可以设计成活动式喷嘴，使它在一定范围内可调。依据不同零件的结构形状和尺寸，我们可采用两种方法，一是高压喷嘴固定不动，零件转动或移动。二是零件固定不动，而高压喷嘴移动或转动。另外，我们还可配置多头喷嘴或多喷管式可动喷嘴以提高生产率。更多相关内容就来我们网站http://senfuai.com咨询！

We can see that the structural shape and requirements of different parts determine the number of high-pressure nozzles, nozzle configuration and injection form. In order to make the high-pressure nozzle have strong adaptability, we can design a movable nozzle to make it adjustable within a certain range. According to the structural shape and size of different parts, we can adopt two methods. One is that the high-pressure nozzle is fixed and the parts rotate or move. The other is that the parts are fixed while the high-pressure nozzle moves or rotates. In addition, we can also configure multi-head nozzle or multi-nozzle movable nozzle to improve productivity. Come to our website for more relevant content http://senfuai.com consulting service