碳氢清洗机的水箱在使用前后一定要记得清理，相关规定为水箱内部腔体无腻滑感、无油迹、无碎碎渣等杂质，灌满水后无漂浮物，水面无油珠，水箱内过滤器挡板无油无堵塞物等。

The water tank of the hydrocarbon washer must be cleaned before and after use. The relevant provisions are that the internal cavity of the water tank is free of greasy and slippery feeling, oil stains, debris and other impurities, there is no floating object after filling the water, there is no oil droplet on the water surface, and there is no oil or blockage on the filter baffle in the water tank.

(1)关闭碳氢清洗机的总供水阀和各水箱的全自动和手动式供排水阀。

(1) Close the main water supply valve of the hydrocarbon washer and the automatic and manual water supply and drainage valves of each water tank.

(2)将水箱内的水流尽后（排水前一定核对加热仪温度已下降，不然会烧毁加热仪器），从碳氢清洗机下方拖出水箱至选定的清理区。

(2) After the water in the water tank is drained (check that the temperature of the heater has dropped before draining, otherwise the heater will be burned), drag the water tank from below the hydrocarbon washer to the selected cleaning area.

(3)先用洁净无油渍不脱毛清洁抹布及日常自来水擦试水箱内腔，过滤器隔离网，再用碳氢清洗机清洗，直到无腻滑感。

(3) First, wipe the inner chamber of the water tank and the filter isolation net with a clean, oil-free, lint free cleaning rag and daily tap water, and then clean them with a hydrocarbon washer until there is no greasy feeling.

(4)若有油迹，则用工业酒精洗擦。

(4) If there is oil stain, wash and wipe it with industrial alcohol.

(5)开启手动式排水阀，用日常自来水清洗水箱内腔后将水放尽。

(5) Open the manual drain valve, clean the inner chamber of the water tank with daily tap water, and then drain the water.

(6)将各水箱充注自来水，检测各水箱水面有没有油珠、水里有没有漂浮物，若有，则应重新清洗。

(6) Fill each water tank with tap water, and check whether there are oil drops on the water surface and floating objects in the water. If there are floating objects in the water, they should be cleaned again.

(7)检测碳氢清洗机浮球阀，加热仪，温度指示仪有没运行没问题。

(7) Check whether the float valve, heater and temperature indicator of the hydrocarbon cleaning machine operate.

此外碳氢清洗机日常保养维护必不可免，这样不仅能减少耗能，而且设备运作正常也不耽误清洗的产量。更多相关详细的内容就来我们网站senfuai.com咨询了解吧！

In addition, the daily maintenance of the hydrocarbon cleaning machine is inevitable, which can not only reduce energy consumption, but also ensure the normal operation of the equipment without delaying the cleaning output. For more details, please come to our website senfuai.com for consultation!