喷淋清洗机作为一款机械设备，除了其能实现清洗目的外，对其自身的检查也是必不可少的，那如何检查呢？小编为您解说一番。

As a mechanical equipment, the spray washer can not only achieve the purpose of cleaning, but also is indispensable for its own inspection. How to inspect it? I'll explain it to you.

1、喷淋清洗机底部排水筛无杂物：喷淋清洗机底部的排水筛会留滞来自器械组的污染物。应少每天取下筛网并清洗，或根据使用次数增加清洗频率。阻塞的筛网会阻碍水流和排水，从而影响清洗机的清洗效力。

1. The drain screen at the bottom of the spray washer is free of impurities: the drain screen at the bottom of the spray washer will retain pollutants from the instrument set. The screen should be removed and cleaned at least daily, or more frequently depending on the number of uses. Blocked screen will block water flow and drainage, thus affecting the cleaning effectiveness of the washer.

2、清洗剂/化学品输送管道清晰、功能正常：目视检查所有清洗剂等化学品输送管道和连接端口：确保它们清晰，清洁，无阻塞、滞留空气、扭结。管道上的磨损痕迹、破损或泄漏也应注意检查。如果输送管道有问题，则清洗液的浓度可能不正确从而使清洗循环无效。

2. Cleaning agent/chemical delivery pipeline is clear and functional: visually inspect all cleaning agent and other chemical delivery pipelines and connection ports: ensure that they are clear, clean and free of blockage, trapped air and kinks. Attention shall also be paid to the inspection of wear marks, damages or leaks on the pipeline. If there is a problem with the delivery pipe, the concentration of the cleaning solution may be incorrect, which will invalidate the cleaning cycle.

3、检查喷淋清洗机所有化学品、清洗剂浓度是否正确：确保清洗剂及其他化学品容器内的余量充足，确保输送分配管道正确连接到对应的容器。

3. Check whether the concentration of all chemicals and cleaning agents in the spray washer is correct: ensure that the residual amount in the containers of cleaning agents and other chemicals is sufficient, and ensure that the delivery and distribution pipes are correctly connected to the corresponding containers.

4、观察喷淋清洗机总体情况：舱体内表面应清洁，无污点、水垢及其它污染物堆积。这些都可能影响清洗机的性能和清洗效果。污点和水垢可能表明有水质、化学品浓度过高等问题。确保任何适用的垫圈、密封圈、记录器都处于正常状态。

4. Observe the overall condition of the spray washer: the interior surface of the cabin shall be clean and free of stains, scale and other pollutants. These may affect the performance and cleaning effect of the cleaning machine. Stains and scale may indicate problems such as high water quality and chemical concentration. Ensure that any applicable gaskets, sealing rings and recorders are in normal condition.

5、检查喷淋清洗机舱体内照明灯具工作正常：清洗机拥有视窗和内部照明灯具允许在循环过程中观察清洗机的性能。循环过程中需观察喷淋臂是否正常运行，无器械/托盘阻碍清洗机的性能。观察水流，确保无泡沫过多等迹象。

5. Check that the lighting lamps in the spray cleaning engine room work normally: the cleaning machine has windows and internal lighting lamps, allowing the performance of the cleaning machine to be observed during the cycle. During the circulation, it is necessary to observe whether the spray arm operates normally, and no instrument/tray hinders the performance of the washer. Observe the water flow to ensure that there is no sign of excessive foam.

只有做好这些检查，才能更好的使用该设备，也才能让喷淋清洗机更好的为我们工作，更好的达到我们想要的清洗效果。更多相关内容就来我们网站senfuai.com咨询吧！

Only by doing a good job in these inspections can we better use the equipment and make the spray washer work better for us, so as to better achieve the cleaning effect we want. For more information, please visit our website senfuai.com!