随着超声波清洗机设备的应用范围越来越广泛，各种经过不断完善和改进的清洗设备正在取代已面市的老式设备，通过式喷淋清洗机为大多数人所接受并受到欢迎，下面小编来讲讲它具体的操作工艺流程是怎样的。

With the application scope of ultrasonic cleaning machine equipment becoming more and more extensive, various cleaning equipment that has been constantly improved and improved are replacing the old equipment that has been put on the market. The through type spray cleaning machine is accepted by most people and is welcomed. The following section will talk about its specific operation process.

通过式喷淋清洗机所采用的通过式清洗技术采用频率28KHz的超声波进行清洗，由喷淋系统、喷嘴旋转装置、磷化系统、自动温控加热系统、风切吹水系统等组成。对于某些特定的清洗对象，还配有热空气烘干、专用清洗架及清洗液的过滤循环系统。

The pass through cleaning technology adopted by the pass through spray cleaning machine adopts the ultrasonic wave with a frequency of 28KHz for cleaning, which is composed of the spray system, nozzle rotating device, phosphating system, automatic temperature control heating system, air cutting and water blowing system, etc. For some specific cleaning objects, it is also equipped with hot air drying, special cleaning rack and filtering circulation system of cleaning solution.

通过式喷淋清洗机工作时，将料框置于输送带上，清洗工件装于相对应的料框中，零件不得重叠，节拍为2-3min/筐；料筐依次通过清洗室、漂洗室、吹干、烘干室，完成全过程后自动输出清洗洁净的零件，如有水珠需进行人工补吹，将吹干后的零件放入防尘周转箱。

When the through type spray washer works, place the material frame on the conveyor belt, and put the cleaning workpiece in the corresponding material frame. The parts shall not overlap, and the beat is 2-3 min/basket; The basket passes through the cleaning room, rinsing room, drying room and drying room in turn. After the completion of the whole process, the cleaned parts are automatically output. If there are water drops, manual blowing is required, and the dried parts are put into the dust-proof turnover box.

相比传统的清洗设备，通过式喷淋清洗机的主要特点是不仅能有效的避免高光洁度物体的表面损伤；而且可除去附着在表面的亚微米大小的颗粒；甚至对浸入液体中，面向换能器的一面也能被洗净，所以要进行两面清洗。

Compared with the traditional cleaning equipment, the main feature of the through spray cleaning machine is that it can not only effectively avoid the surface damage of the high finish objects; And the submicron sized particles attached to the surface can be removed; Even for immersion in liquid, the side facing the transducer can be cleaned, so both sides should be cleaned.

通过式喷淋清洗机作业后，被清洁的零件不能停放在运送带上，按中止按钮，使全机中止运转。清洁液应定时添加水和必定份额的金属清洁剂以弥补耗费，使液面保持在必定高度，若是清洁作用达不到规则的技术需求时，应悉数替换清洁液。

After the operation of the through spray washer, the cleaned parts cannot be parked on the conveyor belt. Press the stop button to stop the whole machine. Water and a certain amount of metal cleaner shall be regularly added to the cleaning liquid to make up for the consumption, so as to keep the liquid level at a certain height. If the cleaning effect cannot meet the regular technical requirements, the cleaning liquid shall be replaced in full.

操作通过式喷淋清洗机的时候，注意要将被清洁的零件要规整地放在运送带上，不许压在滚轮上；而且在运送带上，被清洁的零件不能堆得过多，避免影响清洁作用，每个零件都能清洁到。更多注意事项就来我们网站senfuai.com咨询了解吧！

When operating the pass through spray washer, be careful to place the cleaned parts on the conveyor belt in a neat manner, and do not press them on the rollers; In addition, the cleaned parts shall not be stacked too much on the conveyor belt to avoid affecting the cleaning effect, and each part can be cleaned. For more information, please visit our website senfuai.com!