在许多领域，多槽清洗机可以用来清洗物品，因为清洗后的物品比手动清洗干净。然而，为了获得更好的清洗质量，除了按照要求操作各种程序外，我们还需要了解使用多槽清洗机的注意事项。下面我们将介绍使用多槽清洗机的注意事项以及定制事项。

In many fields, multi tank cleaning machine can be used to clean items, because the cleaned items are cleaner than manual cleaning. However, in order to obtain better cleaning quality, in addition to operating various procedures as required, we also need to understand the precautions for using multi tank cleaning machine. Next, we will introduce the precautions and customization of using the multi tank cleaning machine.

在使用多槽式超声波清洗机清洗一些较小的零件物品时经常需要使用清洗筐，但是清洗筐上的网眼会引起超声衰减，所以要特别引起注意，注意选择网眼大小合适的清洗篮，此外建议选用不锈钢材质的清洗篮，尽量不要使用塑胶框，这样能够防止静电的产生。

When using the multi slot ultrasonic cleaning machine to clean some small parts and articles, it is often necessary to use the cleaning basket, but the mesh on the cleaning basket will cause ultrasonic attenuation, so special attention should be paid to the selection of the cleaning basket with the appropriate mesh size. In addition, it is recommended to select the cleaning basket made of stainless steel and try not to use the plastic frame, so as to prevent the generation of static electricity.

通常在清洗时每道工序的时间定为三至五分钟，如果被清洗物品的表面积比较大，或者工件的结构较为复杂时，要注意根据实际情况酌情调整多槽式超声波清洗机的清洗时间。若被清洗物容易出现重叠以及粘附的现象，那么在将被清洗物放入及取出槽液的时候可以抖动一下工件，让清洗剂充分与工件接触以提高清洗效果。

Usually, the time of each process is set at three to five minutes during cleaning. If the surface area of the cleaned object is relatively large or the structure of the workpiece is complex, pay attention to adjust the cleaning time of the multi slot ultrasonic cleaning machine according to the actual situation. If the cleaned objects are prone to overlap and adhere, the workpiece can be shaken when the cleaned objects are put into and taken out of the tank liquid, so that the cleaning agent can fully contact the workpiece to improve the cleaning effect.

用多槽式超声波清洗机清洗工件要注意槽液不能加得太满，以免发生两槽超声波清洗剂之间相互混合以及沥干时清洗筐底部黏液的现象。此外，多槽式超声波清洗机的每个槽应为独立的操作工序，注意不要将两槽清洗剂相互串用或人为减少操作工序以及清洗的操作时间。

When cleaning the workpiece with a multi tank ultrasonic cleaner, pay attention to that the tank liquid cannot be filled too full, so as to avoid mixing between the two tanks of ultrasonic cleaner and cleaning the mucus at the bottom of the basket when draining. In addition, each tank of the multi tank ultrasonic cleaning machine should be an independent operation process. Pay attention not to use the two tanks of cleaning agents in series with each other or artificially reduce the operation process and cleaning operation time.

山东超声波清洗机厂家提醒您，定制多槽清洗机有一些需要注意的事项，要了解工件的尺寸，一次清洗的数量，以此来决定单个清洗槽的尺寸，这是为重要的一点；其次，工件处于生产流程的哪一个环节，是全新的还是返修的，是处于中间流程还是尾流程，这些决定了多槽清洗机的工艺配置。

Shandong ultrasonic cleaning machine manufacturer reminds you that there are some matters needing attention in customizing the multi tank cleaning machine. It is important to understand the size of the workpiece and the number of cleaning at a time, so as to determine the size of a single cleaning tank; Secondly, the process configuration of the multi tank cleaning machine is determined by which part of the production process the workpiece is in, whether it is new or repaired, whether it is in the intermediate process or the final process.

如是否要配备循环过滤系统、是否需要分油器等等。所谓循环过滤就是在清洗过后的漂洗槽中水不断循环，这样可以达到佳漂洗效果，而分油器就是将工件中的油污分离出来，这样的清洗效果要更好。

Such as whether to equip with circulating filtration system, whether to need oil separator, etc. The so-called circulating filtration refers to the continuous circulation of water in the rinsing tank after cleaning, so as to achieve a good rinsing effect, and the oil separator is to separate the oil stains in the workpiece, so the cleaning effect is better.

定制清洗机时提供的参数越详细就越有利于定制合适的设备，当然在使用之前建议是了解该设备的相关信息越多越好，这样才能更好更顺利的进行操作，您可以关注网站senfuai.com进行咨询。

The more detailed the parameters provided when customizing the cleaning machine, the more conducive it is to customize the appropriate equipment. Of course, it is recommended to understand the more relevant information of the equipment before use, so as to operate better and smoothly. You can follow the website senfuai.com for consultation.