经常有客户问道关于碳氢清洗的问题，为此小编专门为大家整理了碳氢清洗机几个关键注意点，希望可以帮助客户掌握更多有关碳氢清洗机的使用及知识，提升碳氢清洗的效率。

Customers often ask questions about hydrocarbon cleaning. For this reason, the editor specially sorted out several key points for attention of hydrocarbon cleaning machines, hoping to help customers master more about the use and knowledge of hydrocarbon cleaning machines and improve the efficiency of hydrocarbon cleaning.

清洗时间是不是越长越好？

Is the longer the cleaning time, the better?

我们要明确，并不是清洗时间越长越好。

We should make it clear that the longer the cleaning time, the better.

具体的清洗时间要根据清洗工件结构、材质、油污及清洗方式的不同，所需的清洗时间也会有所差异。一般来说，油污较重零件的清洗时间可适当延长，油污较轻易于清洗的可缩短清洗时间；清洗的同时，还要保证清洗的效率，所以清洗时间是根据清洗实际效果而定，并非一成不变的。相反，如果刻意延长了清洗时间，工件表面长时间摩擦，还可能会导致工件表面损伤。

The specific cleaning time will vary according to the structure, material, oil stain and cleaning method of the cleaned workpiece. Generally speaking, the cleaning time of parts with heavy oil stain can be appropriately extended, and the cleaning time can be shortened if the oil stain is light and easy to clean; At the same time of cleaning, we should also ensure the efficiency of cleaning, so the cleaning time is determined according to the actual effect of cleaning, not unchanging. On the contrary, if the cleaning time is deliberately prolonged, the workpiece surface will rub for a long time, which may also cause damage to the workpiece surface.

碳氢清洗机佳清洗温度？

What is the optimal cleaning temperature of hydrocarbon cleaning machine?

正常情况下，低闪点的碳氢清洗剂是不允许加温清洗的。高闪点碳氢清洗剂加温对温度的控制非常关键，如果是初次加温使用，请务必由的技术人员进行指导操作，并做好安全防范工作。

Under normal circumstances, hydrocarbon cleaning agents with low flash point are not allowed to be heated for cleaning. The heating of high flash point hydrocarbon cleaning agent is very critical to the temperature control. If it is used for the first time, please be sure to be guided by professional technicians and do a good job in safety precautions.

清洗温度主要取决于所用碳氢清洗剂的清洗工艺及闪点。随着加温温度的提升，一般情况下碳氢清洗剂的清洗力是有一定程度提升的，但由于碳氢有可燃性，清洗温度越高碳氢蒸汽挥发越快，所以在加温的同时需要严格把控加温温度。

The cleaning temperature mainly depends on the cleaning process and flash point of the hydrocarbon cleaning agent used. With the increase of heating temperature, the cleaning power of hydrocarbon cleaning agent is generally improved to a certain extent. However, due to the flammability of hydrocarbon, the higher the cleaning temperature is, the faster the hydrocarbon vapor volatilizes. Therefore, the heating temperature needs to be strictly controlled at the same time of heating.

一般来说，碳氢清洗温度控制比碳氢闪点低约15℃，这样安全隐患相对会小一些。因此，需要综合考虑碳氢清洗工艺及闪点的性质，从而设定产品的清洗温度。

Generally speaking, the temperature control of hydrocarbon cleaning is about 15 ℃ lower than the flash point of hydrocarbon, so the potential safety hazards will be relatively small. Therefore, it is necessary to comprehensively consider the hydrocarbon cleaning process and the nature of flash point, so as to set the cleaning temperature of the product.

碳氢清洗机清洗方式

Cleaning method of hydrocarbon cleaning machine

目前碳氢清洗剂常见的清洗方式主要分为：超声波清洗、真空超声波清洗机清洗，具体选择哪种清洗工艺则要结合需要清洗的工件和原有的清洗工艺来决定。

At present, the common cleaning methods of hydrocarbon cleaning agents are mainly divided into ultrasonic cleaning and vacuum ultrasonic cleaning. The specific selection of cleaning process should be determined in combination with the workpiece to be cleaned and the original cleaning process.

全自动超声波清洗机厂家提醒您，不同的清洗方式也有其各自的特点。

The manufacturer of automatic ultrasonic cleaning machine reminds you that different cleaning methods also have their own characteristics.

超声波清洗分为普通超声波清洗与真空超声波清洗。

Ultrasonic cleaning is divided into ordinary ultrasonic cleaning and vacuum ultrasonic cleaning.

普通超声波清洗，设备资金投入较少，可手动操作，灵活便捷。但清洗剂损耗与换液频率相对较高。对有盲孔的产品清洗力较弱。

Ordinary ultrasonic cleaning, with less capital investment, can be manually operated, flexible and convenient. However, the detergent loss and fluid change frequency are relatively high. The cleaning power of products with blind holes is weak.

真空超声波清洗，投入的资金相对较大，通常是自动化清洗，使用简单方便。清洗剂的损耗和换液频率都较低，对有盲孔的产品清洗效果较好，清洗品质更稳定，安全性也更强。

Vacuum ultrasonic cleaning, with relatively large investment, is usually automatic cleaning, which is simple and convenient to use. The loss of cleaning agent and the frequency of liquid change are low, and the cleaning effect is better for products with blind holes. The cleaning quality is more stable and the safety is stronger.

以上就是今天为大家介绍的关于问题以及注意事项的全部内容，希望对大家能有所帮助，想要了解更多内容可以电话联系我们或者关注我们的网站senfuai.com，我们的工作人员会及时与您取得联系。

The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website senfuai.com, our staff will contact you in time.